Polystyrene-supported phosphine oxide-catalysed Beckmann rearrangement of ketoximes in 1,1,1,3,3,3-hexafluoro-2-propanol

A polystyrene-supported phosphine oxide-catalysed Beckmann rearrangement of ketoximes in 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) has been developed. Good substrate compatibility, mild reaction conditions, good yields as well as the reusability of the catalyst/solvent made this procedure more environmentally benign.     

Inhibition effect of butan-1-ol on the corrosion behavior of austenitic stainless steel (Type 304) in dilute sulfuric acid

The electrochemical behavior of austenitic stainless steel (Type 304) in 3 M sulfuric acid with 3.5% recrystallized sodium chloride at specific concentrations of butan-1-ol was investigated with the aid of potentiodynamic polarization, open circuit measurement and weight loss technique. Butan-1-ol effectively inhibited the steel corrosion with a maximum inhibition efficiency of 78.7% from weight-loss analysis and 80.9% from potentiodynamic polarization test at highest concentration studied. Adsorption of the compound obeyed the Freundlich isotherm. Thermodynamic calculations reveal physiochemical interactions and spontaneous adsorption mechanism. Surface characterizations showed the absence of corrosion products and topographic modifications of the steel. Statistical analysis depicts the overwhelming influence and statistical significance of inhibitor concentration on the inhibition performance.     

Synthesis and Structures of Arene Ruthenium (II)–NHC Complexes: Efficient Catalytic α‐alkylation of ketones via Hydrogen Auto Transfer Reaction

A panel of six new arene Ru (II)‐NHC complexes 2a‐f , (NHC = 1,3‐diethyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1a , 1,3‐dicyclohexylmethyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1b and 1,3‐dibenzyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1c ) were synthesized from the transmetallation reaction of Ag‐NHC with [(η⁶‐arene)RuCl₂]₂ and characterized. The ruthenium (II)‐NHC complexes 2a‐f were developed as effective catalysts for α‐alkylation of ketones and synthesis of bioactive quinoline using primary/amino alcohols as coupling partners respectively. The reactions were performed with 0.5 mol% catalyst load in 8 h under aerobic condition and the maximum yield was up to 96%. Besides, the different alkyl wingtips on NHC and arene moieties were studied to differentiate the catalytic robustness of the complexes in the transformations.     

Graphene oxide: a surfactant or particle?

Graphene oxide is a two-dimensional carbon nanomaterial that has risen to prominence over the last decade as graphenes water-dispersible counterpart. This key feature offers tremendous potential in the formation of waterborne hybrid materials, coatings, membranes and adsorbents that make use of its diverse surface chemistry and extraordinary surface area. However, the fundamental colloidal properties of graphene oxide remain incompletely understood, with conflicting reports on how the material's amphiphilic nature and adsorption at interfaces render it surfactant-like or particle-like in nature. In the present work, recent developments in understanding the bulk and interfacial colloidal properties of graphene oxide are explored in the context of its chemistry and system thermodynamics, giving insight into the fundamental question of whether its aqueous behaviour is most accurately described as particle-like, surfactant-like or indeed something entirely different.     

First principles investigations of Fe,Co, Ni in model honeycomb carbon networks

The behaviors of ferromagnetic transition metals of the first period: Fe, Co and Ni are examined within density functional theory calculations in two dimensional carbon extended networks using model structure LiC₆. Around geometry optimized structures, the energy-volume equations of states considering non magnetic and spin polarized configurations established ferromagnetic ground states with magnetizations –reduced with respect to the metals’– of 2 μ_B for FeC₆ and 1 μ_B for CoC₆ while no magnetic solution could be identified for NiC₆. In the D_6h point group of the P6/mmm space group l_m decomposition of the d states results with increasing energy into doublet state E_1g with d(x²-y²) and d(xy); singlet state A_1g d(z²) and doublet state E_2g d(xz) and d(yz) lying on E_F and responsible of the onset of magnetic moments. This was mirrored via molecular orbital approach with a construct of Fe embedded between two extended carbon networks thus validating the model structure proposed for TC₆ compounds. The 100% polarization in one spin channel allows proposing potential uses in spintronics applications.     

Synthesis of μ2-Oxo-Bridged Iron(III) Tetraphenylporphyrin–Spacer–Nitroxide Dimers and their Structural and Dynamics Characterization by using EPR and MD Simulations

Iron(III) porphyrins have the propensity to form μ₂-oxo-dimers, the structures of which resemble two wheels on an axle. Whereas their crystal structure is known, their solution structure and internal dynamics is not. In the present work, the structure and dynamics of such dimers were studied by means of electron paramagnetic resonance (EPR) spectroscopy and quantum chemistry based molecular dynamics (MD) simulations by using the semiempirical tight-binding method (GFN-xTB). To enable EPR investigation of the dimers, a nitroxide was attached to each of the tetraphenylporphyrin cores through a linear and a bent linker. The inter-nitroxide distance distributions within the dimers were determined by continuous-wave (cw)-EPR and pulsed electron–electron double resonance (PELDOR or DEER) experiments and, with the help of MD, interpreted in terms of the rotation of the porphyrin planes with respect to each other around the Fe–O–Fe axis. It was found that such rotation is restricted to the four registers defined by the phenyl substituents. Within the registers, the rotation angle swings between 30° and 60° in the proximal and between 125° and 145° in the distal register. With EPR, all four angles were found to be equally populated, whereas the 30° and 145° angles are strongly favored to the expense of the 60° and 125° angles in the MD simulation. In either case, the internal dynamics of these dimers thus resemble the motion of a step motor.     

Thermal Activation of CH4 and H2 as Mediated by the Ruthenium Oxide Cluster Ions [RuOx]+ (x=1–3): On the Influence of Oxidation States

Thermal gas-phase reactions of the ruthenium-oxide clusters [RuO_x]⁺ (x=1–3) with methane and dihydrogen have been explored by using FT-ICR mass spectrometry complemented by high-level quantum chemical calculations. For methane activation, as compared to the previously studied [RuO]⁺/CH₄ couple, the higher oxidized Ru systems give rise to completely different product distributions. [RuO₂]⁺ brings about the generations of [Ru,O,C,H₂]⁺/H₂O, [Ru,O,C]⁺/H₂/H₂O, and [Ru,O,H₂]⁺/CH₂O, whereas [RuO₃]⁺ exhibits a higher selectivity and efficiency in producing formaldehyde and syngas (CO+H₂). Regarding the reactions with H₂, as compared to CH₄, both [RuO]⁺ and [RuO₂]⁺ react similarly inefficiently with oxygen-atom transfer being the main reaction channel; in contrast, [RuO₃]⁺ is inert toward dihydrogen. Theoretical analysis reveals that the reduction of the metal center drives the overall oxidation of methane, whereas the back-bonding orbital interactions between the cluster ions and dihydrogen control the H−H bond activation. Furthermore, the reactivity patterns of [RuO_x]⁺ (x=1–3) with CH₄ and H₂ have been compared with the previously reported results of Group 8 analogues [OsO_x]⁺/CH₄/H₂ (x=1–3) and the [FeO]⁺/H₂ system. The electronic origins for their distinctly different reaction behaviors have been addressed.     

Oxidative dehydrogenation of n-octane over a vanadium–magnesium oxide catalyst: Influence of the gas hourly space velocity

Oxidative dehydrogenation (ODH) of n-octane was carried out over a vanadium–magnesium oxide catalyst in a continuous flow fixed bed reactor. The catalyst was characterized by ICP–OES, powder XRD and SEM. The catalytic tests were carried out at different gas hourly space velocities (GHSVs), viz. 4000, 6000, 8000, and 10,000 h^?1. The best selectivity for octenes was obtained at the GHSV of 8000 h^?1, while that for C8 aromatics was attained at the GHSV of 6000 h^?1 at high temperatures (500 and 550 °C). The catalytic testing at the GHSV of 10,000 h^?1 showed the lowest activity, while that at the GHSV of 4000 h^?1 consistently showed the lowest ODH selectivity. Generally, the best ODH performance was obtained by the catalytic testing at the GHSVs of 6000 and 8000 h^?1. No phasic changes were observed after the catalytic testing.     

Synergistic Activities in the Ullmann Coupling of Chloroarenes at Ambient Temperature by Pd‐Supported Calcined Ferrocenated La2O3

Novel palladium‐doped nanoparticles have been explored to serve as the first metal oxide‐derived heterogeneous catalyst for Ullmann reaction of chloroarenes under mild condition (34 °C). This heterogeneous catalyst exhibited high catalytic activity towards the Ullmann homocoupling of chloroarenes into a series of useful symmetrically biaryl products with good to excellent yields in the presence of ethanol and NaOH, thereby leading to green and economical Ullmann reaction. The produced nanoparticles were successfully characterized by various techniques including PXRD, XPS, HRTEM, SEM‐EDS, BET, TGA techniques, elemental mapping analysis and ICP‐OES. Interestingly, based on characterization and experimental data, a reasonable mechanism has been proposed. Also, the formation of aryl methyl ketone as a by‐product has been further confirmed by isotopic labelling experiments that the acetyl moiety is derived from ethanol. Moreover, the catalyst was stable and could be easily reused up to 5 times under atmospheric air without suffering significant loss in catalytic activity.